Home>Products>Skf Bearing Grease>LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
category
Skf Bearing Grease
SKF LAGD125/FP2 Bearing SPECIFICATIONS
- SKF
LAGD125/FP2
- 1 max.
- 400
- 0–0
- –20 to +120 °C (–4 to +248 °F)
- 0–0
- 170 °C min. (338 °F min)
- +50 max.
- 0–0
-
TRAB BEARINGS PRODUCTION EXPORT CO., LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Details
- 1 max.
- 400
- 0–0
- –20 to +120 °C (–4 to +248 °F)
- 0–0
- 170 °C min. (338 °F min)
- +50 max.
- 0–0
- 1
- Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication systems;
- Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature; Good flow properties that enable easy replenishment within the bearing design;
- KP1K-20
- 25
- Mineral
- LGEP 1/(pack size)
- LGEP 1/18
- Lithium-Calcium
- Beige
- Designation
- 3400 min.
- 310–340
- 1 max.
- 1.8 max.
- Pass at 80 °C
- 1–5
- +50 max.
- 1 000 min. at 100 °C
SKF LAGD125/FP2 LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Dimensions
You may like Skf Bearing Grease as bellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | m | W | D | B | H | t | Z | |
ZR3.20.1250.400-1SPPN | ISB | - | 12 mm | - | 1397 mm | - | 132 mm | - | 87 mm |
ARN65125 | NTN | - | - | - | 125 mm | - | - | - | - |
ZAXFM1255 | INA | 0,05 mm / Axial runout accuracy | 160 g / Weight | 3 mm / Grub screw to DIN 913 | 55 mm / The bearing outer ring is blue anodised | 20 mm | 35 mm | 24 mm | - |
125TAD20 | NACHI | - | - | - | 180 mm | - | - | - | - |
125RIF550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
125RIF551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
125RIJ550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
ZGB 110X125X100 | INA | - | - | - | 125 mm | 100 mm | - | - | - |
ZARN 65125 L TN | NBS | - | - | - | 125 mm | 17,5 mm | - | - | - |
ZARN 65125 TN | NBS | - | - | - | 125 mm | 17,5 mm | 82 mm | - | - |
125RIJ551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHHT265/EML12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video
SKF LAGD125/FP2 INTERCHANGE
Skf Bearing Grease Part series LAGD125/FP2 is a potential replacement for these common bearing part numbers:
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
LAGD125/FP2
Contact Us
![](https://exmah.com/uploaded_images/34791.jpg)
- TRAB BEARINGS PRODUCTION EXPORT CO., LTD
- AddressChullora NSW SYDNEY AUSTRALIA
- Phone(Working Time)+61-2-9985 9219
- Fax
SKF LAGD125/FP2 Technical Articles
Can you over grease wheel bearings? |
Can you use wd40 to lubricate bearings? |
Can you use wheel bearing grease in a CV joint? |
Skf Bearing Grease CATEGORIES
- 100x180x34 bearing
- 105x260x60 bearing
- 110x150x20 bearing
- 140x225x68 bearing
- 140x90x24 bearing
- 190x340x120 bearing
- 240x320x80 bearing
- 260x440x144 bearing
- 340x580x190 bearing
- 45x52x20 bearing
- 45x68x32 bearing
- 55x72x9 bearing
- 5x13x4 bearing
- 75x160x37 bearing
- 80x120x55 bearing
- 80x170x39 bearing
- 90x225x54 bearing
- 625zz Bearing
- Bearing 6000
- a10vso rexroth Bearing
- lm11949 Bearing
- Double Row Double Row Bearings
- Double Direction Thrust Bearings
- Tapered Roller Bearings Double-Row
- Turntable Bearings
- Skf Bearing Grease
Customers Who Viewed SKF LAGD125/FP2 Bearing Also Viewed
LGEP2/18 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LGLT2/1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
LHRP2/5 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils